Foxconn 915A01-P-8EKRS2 - Manual (Page 28)

Chapter 2 Installation Instructions
20
915A01 Series User Manual
HDD connector: IDE
The connector supports the provided Ultra DMA 100/66 IDE hard disk ribbon
cable. Connect the cable’s blue connector to the IDE connector, then connect
the gray connector to the Ultra DMA 100/66 slave device (hard disk drive) and
the black connector to the Ultra DMA 100/66 master device.
Attention:
Ribbon cables are directional, therefore, make sure to always con-
nect with the cable on the same side as pin 1 of the IDE or FDD
connector on the motherboard.
IDE
1