Foxconn 865G7AF-8EKS User Manual
Page 44
Chapter 3 BIOS Description
38
v
USB KB&MS Wake-Up From S3 (Default: Disabled)
This option is used to set the system to wake up by USB equipment when it is
in S3 (Suspend to RAM) mode.
v
Resume by Alarm (Default: Disabled)
This option is used to set the timing of the startup function. In order to use this
function, the startup password function must be canceled. Also, the PC power
source must not be turned off. The setting values are Disabled and Enabled.
v
Date (of Month) Alarm
This option is used to set the timing for the startup date. The setting values
contain 0-31.
v
Time (hh:mm:ss) Alarm
This option is used to set the timing for the startup time. The setting values
contain hh:0 – 23; mm:0 – 59; ss:0 – 59.
PnP/PCI Configurations
v
Resources Controlled By (Default: Auto (ESCD))
This option is used to define the system resource control scheme. If all cards
you use support PnP, then select Auto (ESCD) and the BIOS will automatically
distribute interruption resources. If the ISA cards you installed are not sup-
porting PnP, you will need to select “Manual” and manually adjust interrup-
tion resources in the event of hardware conflicts. However, since this
motherboard has no ISA slot, this option does not apply.
PnP/PCI Configurations Menu