Foxconn 865G7AF-8EKS - Manual (Page 14)

Chapter 2 Installation Instructions
8
3. Use thumb & forefinger to hold the hook of the load lever and pull the lever
sideways to unlock it.
Correct Wrong
4. Lift up the lever. Use thumb to open the load plate. Be careful not to touch the
contacts.
5. Hold the CPU and tilt it to some degree since the contacts are designed to
be hooked, then match the triangle marker to Pin 1 position as shown below.
Carefully insert the CPU into the socket until it fits in place.
Pin 1 indicator
Warning:
DO NOT use finger to lift or tick the locking lever, the improper opera-
tion will cause finger hurt and the SKT in a poor operation condition.
Alignment key