Foxconn H97M Plus - Manual (Page 25)

HARDWARE INSTALLATION
18
INTR
GND INTRUDERJ
1
SATA Express connector
1 IFDET
CLKRQ0#
PERST#
Reserved
TX+
TX-
GND
GND
RX-
RX+
GND
TX+
TX-
RX-
RX+
GND
GND
GND
SATA express connector
The SATA Express connector is used to connect
SSD, allows up to 8GB/s data transfer rate.
Chassis Intruder Alarm Header : INTR
The header can be connected to a security
switch on the chassis. The system can detect
the chassis intrusion through the function of this
connector. If eventually the chassis is closed,
the system will send a message out.