Foxconn A88GML - Manual (Page 59)

4
52
4.5 Limit Setting - NB Fan
This page lets you to set NB fan low limit rpm and enable the alert function.
5. Voltage Page - Voltage Control (Optional)
This page lets you set CPU voltage, memory voltage and North Bridge voltage
manually. CPU voltage can be stepped up/down by a unit of 12.5mV, while memory is
0.05V/step, and North Bridge is 0.04V/step.
Set low limit rpm by
dragging the lever
Show current NB
fan rpm value
Enable alert function
when the NB fan runs
slower than low limit
rpm value
Show current low limit
rpm value of NB fan
Go to Voltage page
Select the option
you want to set
Adjust by manual
Reset the changes Apply the changes