Foxconn A88GML - Manual (Page 39)

3
32
USB Configuration
► Onboard USB Controller
This item is used to enable or disable theUSB controller.
► USB 2.0 Controller
This item is used to enable or disable the USB 2.0 controller.
► USB 2.0 Controller Mode
This item is used to set the transmission rate mode of USB 2.0. The available settings are :
[High Speed] in 480Mbps; [Full Speed] in 12Mbps.
► Legacy USB Support
This item is used to enable the support for USB devices on legacy OS. If you have a USB
keyboard or mouse, set to auto or enabled.
CMOS Setup Utility - Copyright (C) 1985-2011, American Megatrends, Inc.
USB Configuration
USB Configuration Help Item
USB Devices Enabled :
None Disabled
Enabled
Onboard USB Controller
USB 2.0 Controller [Enabled]
USB 2.0 Controller Mode [High Speed]
Legacy USB Support [Enabled]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
Options
[Enabled]