Bios security features – Foxconn A88GML User Manual
Page 43

3
36
► CPU Smart Fan Function / System Smart Fan Function
These options are used to enable or disable smart fan function.
Set “CPU Smart fan function”/“System Smart fan function”to [enabled], the follow-
ing items will appear:
► Off PWM Temperature
This item is used to set a off limit of temperature. The fan will stop when the temperature is
lower than the off limit. You can input a value from 0 to 127, or change it by pressing <+>/<->
key.
► Start PWM Temperature
This item is used to set a start limit of temperature. The fan will start to spin when the
temperature exceeds the start limit. The default value is [035].
► Start PWM Value
It allows you to set an initial PWM value to drive the fan when the temperature reaches “Start
PWM Temperature” value.
► Slope PWM Value
It is used to set a slope value in PWM/Temperature diagram. The PWM value is subject to the
temperature input value by linear changing.
bIoS Security features
CMOS Setup Utility - Copyright (C) 1985-2011, American Megatrends, Inc.
BIOS Security Features
Scurity Settings
Help Item
Supervisor Password : Not Installed
Enter or change the
User Password
: Not Installed
password.
Change Supervisor Password
[Press Enter]
Boot Sector Virus Protection [Disabled]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Press Enter]