Foxconn M61PML - Manual (Page 75)

5
68
NVIDIA ® MediaShield Driver
The NVIDIA ® MediaShield driver supports RAID 0, RAID 1 and RAID 0+1 functions.
It allows you to get high performance with fault tolerance, big capacity, or data safety
provided by different RAID functions.
Here, we will use four SATA hard disks as an example to guide you how to select your
RAID system. Assume four hard disks are connected to the motherboard :
SATA port 1 - WDC WD1200JD-98HBBO, 111.79GB
SATA port 2 - Hitachi HDT725025VLA, 232.88GB
SATA port 3 - HDS728080PLA380, 76.69GB
SATA port 4 - ST3320620AS, 298.09GB
The relationships between RAID settings and SATA ports on the motherboard are :
SATA Pri-Master RAID is the SATA port 1 of the motherboard.
SATA Pri-Slave RAID is the SATA port 2.
SATA Sec-Master RAID is the SATA port 3.
SATA Sec-Slave RAID is the SATA port 4.
In section 5-3 later, you will know the relationships between port numbers in the
MediaShield BIOS and SATA ports on the motherboard. We put their descriptions here
for better arrangement. They are :
Port 0.0 is the SATA port 1 of the motherboard.
Port 0.2 is the SATA port 2.
Port 0.1 is the SATA port 3.
Port 0.3 is the SATA port 4.
CMOS Setup Utility - Copyright (C) 1985-2011, American Megatrends, Inc.
SATA Configuration
SATA Configuration Help Item
OnBoard SATA Controller [Enabled]
OnBoard SATA Mode
IDE
RAID
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[RAID]
Options