Foxconn M61PML - Manual (Page 36)

3
29
Integrated Peripherals
CMOS Setup Utility - Copyright (C) 1985-2011, American Megatrends, Inc.
Integrated Peripherals
► SATA Configuration [Press Enter] Help Item
► USB Configuration [Press Enter]
► SuperIO Configuration [Press Enter] Configure the SATA
► OnBoard Devices [Press Enter] device(s).
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Press Enter]
► SATA Configuration / USB Configuration / SuperIO Configuration/OnBoard Devices
Press to go to relative submenu.
SATA Configuration
► OnBoard SATA Controller
This item is used to enable or disable the onboard SATA controller.
► OnBoard SATA Mode
This item allows you to set the operation mode of the SATA ports. Setting values are: [IDE],
[RAID].
CMOS Setup Utility - Copyright (C) 1985-2011, American Megatrends, Inc.
SATA Configuration
SATA Configuration Help Item
OnBoard SATA Controller
OnBoard SATA Mode [IDE ]
IDE
RAID
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Enabled]