Foxconn M61PML - Manual (Page 42)

3
35
PC Health Status
CMOS Setup Utility - Copyright (C) 1985-2011, American Megatrends, Inc.
PC Health Status
Case Open Warning [Disabled] Help Item
CPU Warning Temperature [Disabled]
CPU Shutdown Temperature [Disabled]
CPU Temperature :40 o C/104 o F
System Temperature :31 o C/87 o F Disabled
CPU Fan Speed :2184 RPM Enabled
System Fan Speed :N/A Reset
CPU Core :1.232 V
VTT(V) :1.488 V
+3.3V :3.424 V
+5.0V :5.107 V
+12.0V :11.968 V
5VSB (V) :5.080 V
CPU Smart Fan Function [Disabled]
System Smart Fan Function [Disabled]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Disabled]
Options
► Case Open Warning
This item is used to enable or disable case open warning function.
► CPU Warning Temperature
This option is used to set the warning temperature for the system. When the temperature of
CPU is higher than the set value, the motherboard will send out warning information.
► CPU Shutdown Temperature
This item is used to set the system temperature upper limit. When the temperature exceeds
the set value, the system will shut down automatically.
This function works only when your operating system is supporting ACPI.
► CPU Temperature/System Temperature
The CPU/System temperature are automatically detected and displayed by the system.
► CPU Fan/System Fan Speed
The CPU fan/System fan speed are automatically detected and displayed by the system.
► CPU Core/VTT(V)/+ 3.3V/+5.0V/+12.0V/5VSB
The current voltages are automatically detected and displayed by the system.
► CPU Smart Fan Function / System Smart Fan Function
This option is used to enable or disable smart fan function.
Set “CPU Smart Fan Function”/“System Smart Fan Function”, the following items will
appear:
► Off PWM Temperature
This item is used to set a off limit of temperature. The fan will stop when the temperature is
lower than the off limit. You can input a value from 0 to 127, or change it by pressing <+>/<->
key.
► Start PWM Temperature