Foxconn A7GM-S 2.0 - Manual (Page 85)

78
5
5-2 RAID Enable in BIOS
1. Enter the BIOS setup by pressing key when boot up.
2. Select the “Integrated Peripherals” from the “Main menu”, then select the
“IDE
Configuration” menu and press to go to the configuration items.
3. Enable RAID function and individual SATA port for hard drive or DVD connection.
4. Press to save the setting then PC will reboot itself.
5-3 Select a RAID Array for Use
When BIOS is restarted, it will display a message asking you to press [Ctrl-F] key to
enter the main menu of FastBuild BIOS. Press [Ctrl-F], the Main Menu appears.
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
IDE Configuration
IDE Configuration Help Item
OnBoard PCI IDE Controller [Both] Disabled: Disable the
OnChip SATA Channel [Enabled] I integrated IDE
OnChip SATA Type [RAID] controller.
SATA IDE Combined Mode [Enabled] Primary: Enable only
Combined Mode Option [SATA as Primary] the Primary IDE
controller.
Secondary: Enable
only the Secondary IDE
controller.
Both: Enable both IDE
controllers.
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit
F1:General Help F9:Optimized Defaults
[RAID]
Option ROM Utility (c) 2008 Advanced Micro Devices, Inc.
View Drive Assignment. . . . . . . [ 1 ]
Define LD . . . . . . . . . . . . . . . . . [ 2 ]
Delete LD . . . . . . . . . . . . . . . . . [ 3 ]
Controller Configuration . . . . . . [ 4 ]
[ Main Menu ]
Press 1..4 to Select Option [ESC] Exit
[ Keys Available ]