Foxconn A7GM-S 2.0 - Manual (Page 39)

32
3
concept, wherein a static amount of page-locked graphics memory is allocated during driver
initialization. This fixed amount of memory will provide the user with a guaranteed graphics
memory at all times, and will no longer be available to the OS.
► Primary Video Controller
This item is used to select which graphics controller is used as the primary boot device.
► Surround View
Surround View is the ATI technology that provides multi-graphics controller display capability
for both the ATI PCIe-based graphics card and the ATI integrated graphics processor (IGP).
Enabling SurroundView does not impact display modes (resolution and color depth) or
performance. The display mode of each output is controlled independently by the graphics
controller connected to it.
1. When using a non-ATI PCI Express (PCIe) graphics card, Surround View is not supported.
The integrated graphics processor (IGP) is automatically disabled, and the system memory
allocated to the IGP is freed for other use.
2. When installing an ATI RV610 or RV630 PCIe graphics card, Surround View is [Auto]
by default, and the PCIe graphics card is the default first display device. Enabling
SurroundView in the BIOS enables the integrated UMA graphics controller, which in turn
makes available up to two additional graphics outputs. When enabling the integrated UMA
graphics controller, system memory will be reallocated.
► AMD 780HD Audio
This item is used to set whether the HD Audio controller is enabled through the HDMI port on
the rear panel.
Memory Configuration
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
Memory Configuration
Memory Configuration Help Item
Bank Interleaving [Disabled] Enable bank Memory
Channel Interleaving [Enabled] I interleaving
Enable Clock to All DIMMs [Disabled]
MemClk Tristate C3/ALTVID [Disabled]
DCT Unganged Mode [Always]
Power Down Enable [Enabled]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit
F1:General Help F9:Optimized Defaults
[Disabled]
► Bank Interleaving
Interleaving allows banks of SDRAM to alternate their refresh and access cycles. One
bank will undergo its refresh cycle while another is being accessed. This improves memory