Foxconn A7GM-S 2.0 - Manual (Page 44)

37
3
USB Configuration
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
USB Configuration
USB Configuration Help Item
Module Version - 2.24.3-13.4 Enables support for
legacy USB. AUTO
USB Devices Enabled : option disables
1 Drive legacy support if
no USB devices are
Legacy USB Support [Enabled] connected.
OnBoard USB Controller [Enabled]
USB 2.0 Controller [Enabled]
► USB Storage Configuration [Press Enter]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit
F1:General Help F9:Optimized Defaults
[Enabled]
► Legacy USB Support
This item is used to enable the support for USB devices on legacy OS. If you have a USB
keyboard or mouse, set to auto or enabled.
► OnBoard USB Controller
This item is used to enable or disable the onboard USB controller.
► USB 2.0 Controller
This item is used to enable or disabled the enhanced host controller interface for USB.
If USB devices are connected to the computer, the following item will appear:
► USB Storage Configuration
After pressing , you can set the reset delay for the USB mass storage device. There
are many different emulation types of this USB device, such as floppy, hard disk and CDROM
can be selected.