Foxconn K8T890M2AA-KRS2H User Manual
Page 41
Chapter 3 BIOS Description
34
PnP/PCI Configurations
PnP/PCI Configurations Menu
v
Init Display First
This option is used to set which display device will be used first when your PC
starts up.
v
PNP OS Installed
Set this field to “Yes” if you are running Windows 95, which is PnP compatible.
It is recommended to keep the default setting. The setting values are: No, Yes.
v
Resources Controlled By
This option is used to define the system resource control scheme. If all cards
you use support PnP, then select Auto (ESCD) and the BIOS automatically
distributes interruption resources. If you install ISA cards not supporting PnP,
you will need to select “Manual” and manually adjust interruption resources in
the event of hardware conflicts. However, since this motherboard has no ISA
slot, this option does not apply.
v
IRQ Resources
Press the
v
PCI/VGA Palette Snoop
If you use a non-standard VGA card, use this option to solve graphic accelera-
tion card or MPEG audio card problems (e.g., colors not accurately displayed).
The setting values are: Disabled and Enabled.
v
PCI Express relative items
Maximum Payload Size
This option is used to set maximum TLP payload size for PCI Express devices.
The unit is byte.
PDF 文件使用 "pdfFactory" 试用版本创建