Foxconn K8T890M2AA-KRS2H - Manual (Page 37)

Chapter 3 BIOS Description
30
v Onboard AC’97 Audio
“Auto” allows the motherboard’s BIOS to detect whether you’re using any
audio devices. If so, the onboard audio controller will be enabled. If not, the
onboard audio controller will be disabled. If you want to use different control-
ler cards to connect audio connectors, set the option to “Disabled”. The set-
ting values are: Disabled and Auto.
v USB Controller
This option is used to set onchip USB controller.
v USB2.0 Controller
This option is used to set onchip USB2.0 controller.
v USB Emulation
This option is used to enable or disable USB legacy keyboard, mouse, and
USB storage.
v USB Keyboard/Mouse Support
When USB Emulation is set as KM/MS, the two options are for choosing. This
option is used to enable or disable USB keyboard/mouse support. The
setting values are: Disabled and Enabled.
v On board Lan Device
This option is used to set On board Lan Device.
v Onboard Lan Boot ROM
This option is used to set Onboard Lan Boot ROM.
OnChip PCI Device Setup Menu
PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ www.fineprint.com.cn