Foxconn K8T890M2AA-KRS2H User Manual
Page 40
Chapter 3 BIOS Description
33
v
PS2KB Wakeup Select
This option is used to select which action will wake up PS/2 keyboard from S3
/S4/S5 staus. Use
values are: Hot key, Password.
v
PS2KB Wakeup from S3/S4/S5
This option is used to select which hotkey will wake up by PS/2 keyboard from
S3/S4/S5 staus or disable it. The setting values are: Disabled, Ctrl + F1~F12,
Power, Wake, Any Key.
v
PS2MS Wakeup from S3/S4/S5
This option is used to enable or disable the system to be waken up by PS/2
mouse from S3/S4/S5 staus. The setting values are: Disabled and Enabled.
v
USB Resume from S3
This option is used to enable or disable the USB to be resume from S3. The
setting values are: Disabled and Enabled.
v
Wakeup on PCI Express
This item is used to enable or disable the Wakeup on PCI Express.
v
Resume by PCI Card
This item is used to enable or disable the resume by PCI Card .
v
Resume by Alarm
This item is used to set the timing of the start-up function. In order to use this
function, the start-up password function must be canceled. Also, the PC power
source must not be turned off. The setting values are: Disabled and Enabled.
v
Date (of Month)
This option is used to set the timing for the start-up day of the month. The setting
values contain 0 – 31.
v
Resume Time (hh:mm:ss)
This option is used to set the timing for the start-up time. The setting values
contain hh:0 – 23; mm:0 – 59; ss:0 – 59.
PDF 文件使用 "pdfFactory" 试用版本创建