Formax FD 260-10 - Manual (Page 26)

22
8. SERVICE
8.1 Service
If any problems occur with this equipment or if you
need assistance installing or operating your FD 260-
10, contact an authorized Formax dealer.
NOTE
When calling for service, have your
FD 260-10
’s serial number handy.
8.2 Repacking
Instructions
If it is necessary to ship your FD 260-10 to an
authorized Formax dealer for service, pack it in the
original shipping container and packaging material. If
the original container is not available, the FD 260-10
should be carefully packed so that it will not be
damaged in transit.
NOTE
If the FD 260-10 is packed correctly, your
Shipping Carrier is liable for any damages that
occur during shipping.
Use the following instructions to pack the FD 260-10
with commercially available materials.
1. Double wrap the machine in heavy plastic.
2. Use a heavy duty, double-walled container of 350-
pound test material.
3. Surround the FD 260-10 on ALL sides with at
least 4 to 5 inches of shock absorbing packaging
material. This will provide firm cushioning and
prevent movement inside the container.
4. Seal the top and bottom of the shipping container
with strong tape or banding material.
5. Clearly and legibly mark the shipping container
FRAGILE.
6. Contact your authorized Formax dealer.