Formax FD 260-10 - Manual (Page 17)

13
4.2 Product Stop
Extension
The product stop extension allows you to stack 4
extra inches of mail (8” total) in the FEED TRAY.
PRODUCT STOP
PRODUCT STOP
EXTENSION
KNOBS
NON-OPERATOR SIDE
PRODUCT GUIDE
PRODUCT GUIDE
OPERATOR SIDE
PRODUCT STOP
Figure 4.2 – Product Stop Extension
To install the product stop extension:
1. Loosen both PRODUCT STOP KNOBS secured
to the top of the PRODUCT STOP (refer to Figure
4.2).
2. Slide the notches in the PRODUCT STOP
EXTENSION around the screws in the PRODUCT
STOP KNOBS.
3. Tighten the PRODUCT STOP KNOBS into the
PRODUCT STOP. The PRODUCT STOP
EXTENSION should be secured to the PRODUCT
STOP and form a straight surface from the tray to
the top of the PRODUCT STOP EXTENSION
(refer to Figure 4.2).