Formax – Formax FD 230 User Manual

Page 9

To perform a control upstroke, close the upper cover

and power on the machine.

Press the “Move” icon on the Main screen (fig 2) and

the following menu comes up – “Manual Control” (fig

3).

From the “Manual control” screen press the “1 turn“

icon (fig 3) and the control upstroke will be carried

out.

With the control upstroke completed, power off the

machine and unplug it. Then completely tighten the

hexagonal screws with the tool provided to secure the

blade in position.

Finally, lower the pressing mechanism to its original

position and replace the locking screws.

CHANGING BETWEEN CREASING AND PERFORATING KNIFES - Continued

FORMAX

Fig. 2: Main Screen

Fig. 3: Manual control