Formax FD 230 - Manual (Page 10)

SETTING MACHINE USING TOUCH SCREEN
Language selection
1. After the power supply switch has been turned on, the
display shows the main screen (fig. 4)
2. There is a hidden icon in the left upper corner of the
main screen. If you press this space a language menu
appears (fig. 5).
Press the icon for the required language. The
display will now show the basic menu in the chosen
language.
Counter Reset
1.
To reset the counter, press the blue number to the left
of the “pcs” icon on the main screen (fig. 6), which
is the number of pieces of paper that have been
processed. A keypad will appear. Key in the number
“0” and confirm it by pressing “ENTER”. The Main
screen menu will now read “0”.
Setting the Number of Creases / Perforations
1. Pressing the numeric icon under “Number of creases”
will display the numeric keypad. Key in the number
of creases/perforations needed. The program allows
up to 15 creases/perforations to be set. Confirm the
number of segments by pressing the “Enter” key. The
number of creases/perforations is now set (fig. 7).
Fig. 4: The Main screen
6
Fig. 7: Number of creases / perforations
Fig. 5: Language selection
FORMAX
Fig. 6: Counter Reset
FORMAX