Formax FD 230 - Manual (Page 6)

CONTENTS
2
1 FD 230 7 Hexagonal key
2 Magnetic side guide 8 Magnetic stop
3 Magnetic strip (2) 9 Delivery table
4 Lower creasing/perforating tool 10 Clamp (fitted on the machine)
5 Stripper 11 Creasing knife (fitted on the machine)
6 Perforating knife
1 2 3
4 5 6 7
8 9
Stripper (5)
The stripper is used in situations when creases are close to the front edge of the sheet. In such case the paper may
bend upwards after creasing, hit the cover lid near the exit of the machine and jam inside. The stripper is necessary
to guide the paper past the rollers to pass through the machine easily. To install the stripper refer to the CHANGING
BETWEEN THE CREASING AND PERFORATING KNIVES on page 4. The stripper replaces the clamp.
Warning: Never fit the stripper on the clamp! If the stripper is fitted on the clamp it can touch the upper rubber roller and
destroy it.
10
11