Formax Cut-True 22S - Manual (Page 4)

02
Des. \ Model
22S
Power Supply - 1~, 120V, 60Hz
Cutting Capacity_
(80gsm paper)
m
mm
mm
mm
mm
K
45PP
Max.Cutting Width
430
430 PP
51
Max.Cutting Length
Min.Cutting Lenth
Main Motor Power
0.4 (1/2HP)
Dimensions(LxWxH) 700x625x1200
Weight 92
3951
1~,120V,60Hz
45 (450 sheets)
430
430
51
0.4 (1/2HP)
700x625x1200
90
3952S
1~,230V,50Hz
45 (450 sheets)
430
430
51
0.4 (1/2HP)
700x625x1200
92
3951S
1~,120V,60Hz
45 (450 sheets)
430
430
51
0.4 (1/2HP)
700x625x1200
92
The back-gauge crank, clamp hand wheel with screws and some related tools are separately and properly packed in a
box with the machine. Please install these items right away.
Installation of the machine:
The top part of the machine and the stand must be connected as follows:
1. Assemble the stand in the way that the 4 foundations match the colors marked on the stand, and secure each
connected part with hexagonal screws.
2. Correctly place and install the machine on the stand with care , and tighten the 4 hexagonal nuts to secure the stand
and machine.
1. Push the back-gauge crank slightly toward the machine and turn it counterclockwise in order to load the paper pile
on the deck.
2. Turn the clamp hand wheel clockwise to clamp the paper pile and close the safety guard.
3. Push the 2 enable switches simultaneously and hold them until the cutting cycle is complete.
4. The optical cutting line will project the right cutting position on the paper pile.
Operation Description
Specification:
To
prevent the back gauge device moving forward and backward while cutting,
pull the back-gauge crank toward to the operator to make it idle.
Note : Note :