Formax Cut-True 22S - Manual (Page 12)

9. Carefully remove the old blade from the blade
change safety tool. Set it on a flat surface and
unscrew the handles. Cap the old blade with a
protective pad to prevent injury.
10.
Place the new blade with the beveled cutting
edge facing up, and the screw holes at the top,
as shown here. Remove the protective pad
from the new blade.
To attach the blade change tool, place it over
the blade and screw the handles into the lower
set of screw holes. Then reverse the procedure
to install the new blade.
Beveled cutting edge
10