Formax FD 125 - Manual (Page 8)

Page 8
CONTROL PANEL
Keys Function

Start and Stop the cutter

Change job

Toggle between “Normal Mode” and “Turbo Mode” (Paper Weight Setting Mode)

Select batch count

Pre-feed (Mark Reader Calibration Mode)

Jog forward

Increment settings by 0.1 mm when pressed.

Confirm job and batch count setting.

Decrement settings by 0.1mm when pressed (Mark Reader Calibration Mode).

Jog backward

Reset counter (use with “RESET” button simultaneously)

Save settings

Hold (4s) paper weight setting mode

Reset counter (use with “ENTER” Button simultaneously)

Enter program mode

Change paper weight

Set top margin

Set finished length