Formax FD 125 - Manual (Page 20)

Page 20
TROUBLESHOOTING
Error Troubleshooting
Out of paper >ŽĂĚĨeed tray
Disfeed 1. Adjust the feed tray tension
2. Side guideƐ too tight. Adjust side guideƐ.
3. Fan the paper and reload the paper into ĨĞĞĚƚƌĂLJ
jam sensor 2 1. Remove the paper jam by pulling toward stacking tray.
2. Adjust the feed hopper tension, if double feed happens
jam sensor 3 1. Use JOG key to clear the jam
2. Adjust feed hopper tension, if double feed happens
check top cover Put the top cover in position
check rear cover Put the rear cover in position
FinishĞĚ cardƐ not clean and neat Call for service
Error message cannot reset Check covers and ĐŚĞĐŬĨŽƌpaper jam
OPTIONAL SLITTER CASSETTE
Optional slitters enable the &ϭϮϱ to have more range of applications. Follow the stepƐ below to replace optional slitter
cassette.
1. Lift Top Cover
2. Remove thumbscrewƐ by turning counter-clockwise on
both sideƐ of the slitter cassette.
3. Using both hands, lift ŽƵƚthe slitter cassette.
4. Replace with the desired slitter cassette.
5. Secure the slitter cassette with the thumbscrewƐ by
turning them clockwise.
Thumbscrews
Lift Handles