Formax FD 6102 - Manual (Page 14)

13
ENGLIS
H
3.3.2 Adjusting the Side Guides of the
Document Feeder
To adjust the side guides of the document feeder
trays:
1. Pull lever C.
2. Move the side guides A apart as far as possible
with thumb wheel B.
3. Put a small stack of documents between the
side guides.
4. Move the side guides towards the documents
with thumb wheel B.
The space between the side guides and the
documents should be such that the documents
have just enough play to move freely.
5. Return lever C to its original position.
6. Remove the stack of documents.
3.3.3 Loading the Document Feeder
Tray
To load the document feeder tray:
1. Pull lever C at the tray.
2. Place a stack of documents between the side guides.
Feed the documents (depending on the type of documents) as shown in
3.3.1 ”Document Orientation” on page 12.
3. Return lever C to its original position.
3.3.4 Adjusting the Side Guides of
Feeder 3
To adjust the side guides of feeder 3:
1. Move the side guides C apart as far as
possible with thumb wheel D.
2. Pull back support B.
3. Put a small stack of enclosures (A) between
the side guides.
4. Release support B.
5. Move the side guides towards the enclosures
with thumb wheel D.
The space between the side guides and the
enclosures should be such that the enclosures
have just enough play to move freely.
6. Remove the stack of enclosures.
A
B
C
D