Formax FD 2052IL System - Manual (Page 5)

DESCRIPTION
FUNCTION
With the Formax FD 2052IL AutoSeal System operators can print, fold and seal all in one streamlined process.
One-piece pressure sensitive forms are loaded into an existing laser printer where they’re printed and fed directly
into the IL Pressure Sealer where they’re folded, sealed and output as a mail-ready piece.
1
SPECIFICATIONS
** Dimensions include IL Pressure Sealer and IL Alignment Base.
FD 2052IL System
IL Pressure Sealer
Printer alignment base
Printer (not included in IL System)
Optional 18” conveyor
Printer Compatibility: HP & Troy 4200, only with two 500-sheet trays
HP & Troy 4250, only with two 500-sheet trays
HP & Troy 4350, only with two 500-sheet trays
Consult your Formax dealer for an updated list of additional
FD 2052IL compatible laser printers.
Speed: Printer dependent
Paper Size: Up to 8.5” x 14”
Duty Cycle: Up to 175,000 pieces per month
Power Requirements: FD Model: 120 Volts AC, 50/60 Hz
FE Model: 220 Volts AC, 50/60 Hz
Dimensions (closed) **: 17” W x 43.5” L x 16” H
Dimensions w/18” Conveyor (closed): 17” W x 58.5” L x 16” H
Tabletop Area Required: 19” W x 49” L
Tabletop Area Required
w/18” Conveyor:
19” W x 64” L
Dimensions with Cabinets and
18” Conveyor:
17” W x 69” L x 45.5” H
UNPACKING
1. Check package for shipping damage. If there is shipping damage do not discard the box.
2. CAUTION: Two people must lift the Pressure Sealer out of the box.
3. Package should contain the IL Pressure Sealer and two piece IL Alignment Base.
Printer outfeed / sealer infeed
Sealer transport deck
Lower printer feed tray
Upper printer feed tray
Printer power switch
Sealer alignment base
Paper length toggle switch
Lower fold plate
Upper fold plate
Sealer power switch