beautypg.com

Formax FD 2052IL System User Manual

Page 15

background image

“Paper Jam” is displayed. Paper misfeed between printer

outfeed and sealer infeed

Paper jammed at steel sealer

rollers.

Slide printer back to gain access to

the printer outfeed and remove forms.

Lift top cover of printer, remove toner

cartridge and remove forms. Reinstall

toner, close printer cover, slide printer

back into position and press the “counter

reset” button on sealer to reset sealer.

Remove paper and press “Counter

Reset” button, see pg 12 for clearing

instructions.

Black marks on the folded

forms.

Fold rollers and/or steel sealer

rollers are dirty.

Clean the rollers with approved roller

cleaner and rejuvenator.

Fold is skewed.

Printer and sealer are out of

alignment.

Transport deck belts are dirty

Check to make sure the printer and

sealer are set properly on the alignment

pins

Adjust rear pin on the printer alignment

base, see pg 12 for adjustment

procedure)

Clean belts with approved cleaner

Transport table belts do

not turn.

Broken drive belt, worn drive

gear.

Call for service

Documents are wrinkled

or crunched.

Fold plates are not inserted

correctly.

Piece of paper or other material

is stuck in the fold plate.

Remove and reinstall fold plates. Be

sure they’re properly positioned.

Remove object from the fold plate.

Custom fold is misfolding Fold plate is not plugged in.

Wrong fold is selected

Fold plates are not inserted

correctly.

Piece of paper or other material

is stuck in the fold plate.

Fold settings are off

Plug fold plate in.

Check to make sure the correct fold is

selected from the “Custom fold menu”

Remove and reinstall fold plates. Be

sure they’re properly positioned.

Remove object from the fold plate.

Check that the fold settings match the

actual fold lengths, see pg 9 for custom

fold setup.

“Cover Open” is

displayed.

Cover open

Magnetic switch is broken.

Check that all covers are closed

Call for service

“Paper out “ is displayed. In-feed tray is empty.

Place documents on the in-feed tray.

11