Formax FD 2002 - Manual (Page 9)

Installing Optional Conveyor
1. Assemble the conveyor. Attach the extension tray
to the end of the conveyor using the three extension
tray screws (Fig 2a).
2. Insert power cord to receptacle on the underside of
the conveyor (Fig 2b)
3 Remove catch tray and install the mounting shoulder
bolts into the two screw holes (Fig 2c).
4 Open the top cover of the sealer and remove the
top fold plate. Then slide the conveyor into position
aligning the keyholes on the back of the conveyor
with the shoulder screws, slide in and down to lock
into position.
5. Install the out-feed nip wheels into the two holes
located at the out-feed of the sealer (Fig 2d). Insert
the side of the rod with the spring first, push in and
then insert the other side. Reinstall the top fold plate
and close the top cover.
6. Plug the conveyor into the right receptacle on the
back of the 2000 / 2032 (Fig 3).
Mounting Screws
Fig. 2a
Fig. 2b
Fig. 2c
Shoulder Screws
Fig. 2c
Spring
Fig. 3
5