Formax FD 2002 - Manual (Page 8)

4
Fig. 1b
Locating Pins
Fig. 1a
Locating Pins
Upper Fold Plate Pins
SETUP
Installing Upper and Lower Fold Plates, and
Power Cord
1. Be sure the plate sets firmly on the locating pins
(Fig 1a & 1b). Lift the top cover and slide the upper
fold plate under the top cover pins onto the fold
plate pins. Push down on the fold plate to lock it in
position.
2. Lift the In-feed extension tray and lock it into place.
Then slide the bottom fold plate up and in until it
meets the rear locating pins then push down to set in
place.
3 Plug the power cord into the left receptacle on the
back side of the machine (Fig 1c).
Lower Fold Plate Pins
In-feed extension tray
Top Cover Pins
Fig. 1c