Formax FD 2002 - Manual (Page 11)

Fig. 10 Skew Adjuster
7
Fig. 9
In-feed Tray Lever
5. Set the paper side guides for the forms being used
and lock in position (Fig 8a).
Place a form between the side guides. Adjust the
side guides by loosening knobs on top, then sliding
them toward or away from each other so that the
form is snug but still lies flat .
Leave equal spacing between the guides and side
frame on both sides to help ensure that the forms
feed squarely into the pressure sealer (Fig 8b).
6. Lift the in-feed tray lever, then neatly stack paper on
the in-feed tray under the feed tires and release the
tray lever (Fig 9).
7. Press the “Jog” button on the control panel to test the
folds. Adjust as needed.
8. If the fold is skewed use the skew adjustment knob
to make corrections (Fig.10).
9. When you’re satisfied with the test folds, press the
“Start” button to operate the machine.
Fig. 8a
Paper Side Guides
Fig. 8b
Equal spacing between side frame and
guides on both sides