Fluke Biomedical 1060AM - Manual (Page 6)

Victoreen 1060AM
Operators Manual
1-2
NEMA 4X Enclosure
Model No. Description
1060AM-NM-ER Environmental range - 1 μR to 1000 (μR/hr (SI units)
1060AM-NM-LR Low range - 0.01 mR to 1000 mR/hr (SI units)
1060AM-NM-MR Medium range - 0.1 mR to 10,000 mR/hr (SI units)
1060AM-NM-HR High range - 1 mR to 100,000 mR/hr (SI units)
1060MHV-NM-HR Area Monitor with external MHV probe connection
1.2 Specifications
1.2.1 Digital Specifications
On-board Computer Intel 80C196, 16 Bit, 16 MHz, Embedded CMOS Microcontroller
1 Serial Ports
3 asynchronous modes
Up to 187.5 K Baud @ 12 MHz
1 Buffer for input/output
HSI high-speed input capture
Interrupt on either rising, falling or a transition
2 Timers
Timer 1, Free running, based on XTAL
Timer 2, Incremented by T2CLK or HSI.1
512 Bytes of RAM
8 Channel, 10 Bit, ADC w/ Sample and Hold Available at PCB connector
for external inputs. Two channels are dedicated to jam detection
and detector temperature sensing.
Extended temperature range -25°C to +85°C
Memory PROM OTP (One-Time-Programmable)
16K X 16, (256K) Program/Data
48K X 16, (768K) Paged
RAM Static RAM, 64K X 16 (1Mb)
EEPROM Serial IK X 16, for conversion factors, setpoints, historical data (stored
upon loss of communications only), etc.
Serial Communications Dual UART: Two RS-485 and one RS-232
The RS-485 is the primary communications link to data acquisition system. The
RS-232 is a local diagnostics, local data logging, and set-up port.
Status Indicators 8 LEDs indicating operating status (i.e., communications in progress, normal
operation, high voltage ON/OFF)
Switches 8 DIP switches used to initiate various local functions (i.e., high voltage, on/off,
etc.)
Digital Outputs 16 latched TTL outputs