Remote operation, Rs-232 settings, Ansur software control – Fluke Biomedical BP Pump 2 User Manual
Page 65

Operation
Remote
Operation
3
3-29
Remote Operation
To prepare for remote operation, do the following:
1. Power down the Tester and connect the Tester to your PC, using a standard
bidirectional RS-232 cable.
2. Turn the Tester on: the operating system recognizes the Tester as new
hardware.
You are now ready to operate the Tester remotely.
RS-232 Settings
The Tester serial port parameters are fixed at the following settings:
•
Baud Rate: 9600
•
Parity: None
•
Data Bits: 8
•
Stop Bit:
1
Ansur Software Control
Ansur test automation systems allow a solutions-based approach to complete
testing of the medical device under test (DUT). Ansur helps you create standard
work using the test template/sequence (which is based on your written test
procedure) and integrates all test results into a single test report that can be printed
or archived. Ansur manages your test procedures by allowing both manual and
visual automated test sequences.
The software works hand-in-hand with Fluke Biomedical testers and simulators,
creating a seamless integration for:
•
Visual inspections
•
Preventive maintenance
•
Work procedures
•
Performance tests
•
Safety tests