Fluke Biomedical 942A-200L-M4 - Manual (Page 12)

942A-200L-M4 & 942A-200L-M5 UDR
Operator Manual
1-8
1.5 Recommended Spare Parts
Table 1-5.Recommended Spare Parts List for the Model 942A-200L-M4 or M5 Universal Digital
Ratemeter.
Part Number Description
942A-200L 20M4 Front Panel Assembly (942A-200L-M4 only)
942A-200L 20 Front Panel Assembly (942A-200L-M5 only)
942-100-15 Front Panel P.C. Board Assembly
11-282 DPDT Switch (942A-200L-M4 only)
105-37-1 Ribbon Cable, 18C, Front Panel (5 Required)
92-7027-A Fuse F2, 1 AMP, Main Power
19-62 Fuse, F1, 50 mAmp
92-9042-A Jumper Block (10 required)
67-80-37P Receptacle, P1, I/O, 37 Pin
67-80-14S Receptacle, P2, Detector, 14 Pin
67-80-4P Receptacle, P3, Power, 4 Pin
92-9106-A MHV Bulkhead Receptacle, P4, HV
92-9074-A BNC Bulkhead Receptacle, P5, Signal
68-15 Receptacle, P6, Aux, 24 Pin
68-15 Receptacle, P7, RS 232
942A-100-4 Mating Connector Kit
942-200-50 Power Supply
942-100-70 Relay PC Board Assembly
82-73-1 Relay
942-200-60 H.V. PC Board Assembly
1.6 Receiving Inspection
Upon receipt of the unit:
1. Inspect the carton(s) and contents for damage. If damage is evident, file a claim with the carrier and
notify the Fluke Biomedical Radiation Management Services Customer Service Department.
Fluke Biomedical
Radiation Management Service
6045 Cochran Road
Cleveland, Ohio 44139
Phone: 440.248.9300
Fax: 440.542.3682
2. Remove the contents from the packing material.
3. Verify that all items listed on the packing list have been received and are in good condition.
NOTE
If any of the listed items are missing or damaged, notify
the Fluke Biomedical Radiation Management Service
Customer Service Department.