Fluke Biomedical 57-402 - Manual (Page 7)

Applications and Specifications
Applications and Specifications
2
2-1
Section 2
Applications & Specifications
2.1 Applications & Specifications
The filters and accessories are available individually or as a set (57-445). The 57-445 CLEAR-Pb X-Ray
Compensation Filter Set includes a multi-purpose AP/PA wedge filter (72" FFD), a lateral cervical filter, a
lateral thoracic filter, a pediatric and adult gonad shield, a breast shield assembly, two AP/PA build-up
filters (one thick, one thin), a filter holder, and two mounting plates. A 40" FFD AP/PA wedge Filter is
optional. Filters purchased individually require a filter holder (56-426) to make them compatible with the x-
ray collimator. One filter holder (with mounting plates) is recommended for each x-ray machine. All Filters
have magnetic mounting strips at each end to attach to the matching steel rails on the filter holder.
AP/PA Wedge Filter (72" FFD)
Model 57-405: Size 6 ½” long x 2 ¼” wide x 3/8" thick; weighs 6 oz.
AP/PA Wedge Filter (40” FFD)
Model 57-415: Identical to Model 57-405 except that it is 4-1/8" wide; weighs 10 oz.
Lateral Cervical Filter (72" FFD)
Model 57-406: 6 ½" long x 1 ¼" wide x 3/8" thick; weighs 4 oz.
Lateral Thoracic Filter (72" FFD)
Model 57-407: 6 ½" long x 1 ¼" wide x 3/8" thick; weighs 4 oz.
Breast Shields
Model 57-409: 3" long x 3" wide x 1/8" thick; weighs 2 oz. Will attach to Model 57-426 filter holder with or
without the use of a filter (set of 2 pieces).
Build-Up Filter AP/PA (Thin)
Model 57-430: 6 ½" long x 1 ¼" wide x 1/8" thick. Has magnetic tape on one side, steel on the opposite
side, to allow filter stacking; weighs 2 oz.
Build-Up Filter AP/PA (Thick)
Model 57-434: 6 ½" long x 1 ¼" wide x 9/32" thick. Has magnetic tape on one side, steel on the opposite
side, to allow for filter stacking; weighs 3 oz.
Filter Holder
Model 57-426: Clear plastic, 6 ½" wide x 5 ½" long x ¼" thick. Has two steel rails, 1" wide x 5 ½" long, for
positioning filters and shields. Only one filter holder is needed per x-ray machine.
Mounting Plates
Model 57-411: Clear plastic, 9" long x 9" wide x 1/16" thick. Attached to filter holder with screws. Easily
cut to fit collimator assembly. Two mounting plates are included with each filter holder assembly.