Fluke Biomedical 6000D Impulse Getting Started User Manual
Page 30

Impulse 6000D, 7000DP
Getting Started Manual
18
Lead V1...........................................................24
Lead V2...........................................................48
Lead V3...........................................................100
Lead V4...........................................................120
Lead V5...........................................................112
Lead V6...........................................................80
ECG Normal Sinus
Rates...................................................................30 to 360 (by 1) BPM
ECG High Level Output (BNC Jack)
Amplitude ............................................................0.2 V/mV of Lead I amplitude
Accuracy .............................................................
±5 %. 2 Hz Square Wave
Output Impedance...............................................50 Ω output impedance
ECG on Defibrillator Input Load
Same as Lead II amplitude
ECG Performance Waves
Square wave .......................................................2.0 and 0.125 Hz
Triangular wave...................................................2.0 and 2.5 Hz
Sine waves..........................................................0.05, 0.5, 5, 10, 40, 50, 60, 100, 150, and 200 Hz
Pulse ...................................................................30 and 60 BPM, 60 ms pulse width
R-Wave Detection
Waveform............................................................Haver-triangle
Amplitude ............................................................0.05 to 0.45 (by 0.05) V
0.5 to 5.0 (by 0.5) V
Rate.....................................................................30, 60, 80, 120, 200, and 250 BPM
Widths .................................................................8, 10, 12 ms, and 20 to 200 (by 10) ms
Accuracy .............................................................
±(1 % setting + 0.2 mV)