Flowserve NRG16-41 - Manual (Page 19)

9
■
Wire equipment in series. Star-type wiring is not permitted.
■
Interlink screens of control cables such that electrical continuity is ensured and
connect them once to the central earthing point (CEP).
■
The first and last equipment of a CAN bus network must be provided with a
terminating resistor of 0 Ω. Fig. 13
■
The CAN bus network must not be interrupted while operating.
An interruption will result in high/low level alarm!
Tools
Attention
■
Screwdriver for cross head screws, size
■
Screwdriver for slotted screws, size .5, completely insulated according to VDE 0680
■
Open-end spanner 7 mm A. F.
Wiring
continued