Flowserve VKP 40Ex - Manual (Page 19)

9
Use the arrow buttons , to select (mark) the place of installation of the steam trap and then press the
ENTER key.
The display shows the list
TYPE.
Test measurement
In the menu TEST MEASUREMENT steam traps can be checked for loss of live steam – without prior input of data records and
without the creation of test tasks. The test results will not be saved.
When the data collector is ready for operation select the submenu
TEST MEASUREMENT
(“Connecting and Commissioning” see pages 0 – ).
The display shows the list
LOCATION.
➔
➔
Use the arrow buttons , to select (mark) the functional type of the steam trap used and then press the
ENTER key.
The display shows the following graphic:
➔
➔
Checking Steam Traps
– continued –
For the rest of the steam trap test proceed as described in section TEST.
Note that the test results will not be saved.