Datalogic Scanning QUICKSCAN QD 2300 - Manual (Page 52)

RS-232
46 QuickScan ® L
RTS Line State
This parameter sets the idle state of the Serial Host RTS line. Scan a bar code below to
select Low RTS or
High RTS line state.
Beep on
When this parameter is enabled, the scanner issues a beep when a character is de-
tected on the RS-232 serial line. is issued to gain a user's attention to an illegal
entry or other important event.
*
Host: Low RTS
Host: High RTS
Beep On Character
(Enable)
*
Do Not Beep On Character
(Disable)