9 noise level, Sound pressure level (1.9, noise level) – Flowserve WPG IDP User Manual
Page 9
WPG and WPH USER INSTRUCTIONS ENGLISH 26999969 10-12
Page 9 of 40
flowserve.com
1.8.2 Ecodesign
EU regulation 547/2012 of the Directive
2009/125/EC, for the minimum efficiency of defined
classes of water pumps requires that products must
show their Minimum Efficiency Index (MEI) value.
The EU benchmark MEI
≥ 0.70. Also product
information must be available to users.
Performance curves will have been provided with the
quotation or order or are available at flowserve.com.
The efficiency of a pump with trimmed impeller is
usually lower than that of a pump with the full impeller
diameter. Trimming of the impeller will adapt the
pump to a fixed duty point, leading to reduced energy
consumption. The minimum efficiency index (MEI) is
based on the full impeller diameter.
The operation of this water pump with variable duty
points may be more efficient and economic when
controlled by, for example, by the use of a variable
speed drive that matches the pump duty to the system.
Information on benchmark efficiency is available at;
1.9 Noise level
Attention must be given to the exposure of personnel
to the noise, and local legislation will define when
guidance to personnel on noise limitation is required,
and when noise exposure reduction is mandatory.
This is typically 80 to 85 dBA.
The usual approach is to control the exposure time to
the noise or to enclose the machine to reduce emitted
sound. You may have already specified a limiting
noise level when the equipment was ordered,
however if no noise requirements were defined, then
attention is drawn to the following table to give an
indication of equipment noise level so that you can
take the appropriate action in your plant.
Pump noise level is dependent on a number of
operational factors, flow rate, pipework design and
acoustic characteristics of the building, and so the
values given are subject to a 3 dBA tolerance and
cannot be guaranteed.
Motor size
and speed
kW (hp)
Typical sound pressure level L
pA
at 1 m reference 20 μPa, dBA
3 550 r/min
2 900 r/min
1 750 r/min
1 450 r/min
Pump
only
Pump and
motor
Pump
only
Pump and
motor
Pump
only
Pump and
motor
Pump
only
Pump and
motor
<0.55 (<0.75)
72
72
64
65
62
64
62
64
0.75 (1)
72
72
64
66
62
64
62
64
1.1 (1.5)
74
74
66
67
64
64
62
63
1.5 (2)
74
74
66
71
64
64
62
63
2.2 (3)
75
76
68
72
65
66
63
64
3 (4)
75
76
70
73
65
66
63
64
4 (5)
75
76
71
73
65
66
63
64
5.5 (7.5)
76
77
72
75
66
67
64
65
7.5 (10)
76
77
72
75
66
67
64
65
11 (15)
80
81
76
78
70
71
68
69
15 (20)
80
81
76
78
70
71
68
69
18.5 (25)
81
81
77
78
71
71
69
71
22 (30)
81
81
77
79
71
71
69
71
30 (40)
83
83
79
81
73
73
71
73
37 (50)
83
83
79
81
73
73
71
73
45 (60)
86
86
82
84
76
76
74
76
55 (75)
86
86
82
84
76
76
74
76
75 (100)
87
87
83
85
77
77
75
77
90 (120)
87
88
83
85
77
78
75
78
110 (150)
89
90
85
87
79
80
77
80
150 (200)
89
90
85
87
79
80
77
80
Note: for 1 180 and 960 r/min reduce 1 450 r/min values by 2 dBA. For 880 and 720 r/min reduce 1 450 r/min values by 3 dBA.