Flowserve WPG IDP - Manual (Page 31)

WPG and WPH USER INSTRUCTIONS ENGLISH 26999969 10-12
Page 31 of 40
flowserve.com
8.2.1 CPG parts list and recommended spare parts
Ref on
drawing
Part
no.
Description
Start-up
spares (S1)
2 year
spares (S2)
5 year
spares (S3)
Multiplier for
multiple pumps
1 3260.1 Bearing cover
2 3712 Bearing locknut YES 25%
3 3013 Thrust ball bearing YES
4 6544 ** Circlip YES 25%
5 - Integral frame
5A 3200 Bearing housing
5B 1340 Adaptor
5C 6570.1 Screw
5D - Gasket YES YES 50%
6 6570.2 Screw
7 9322 Plate
8 6700.1 Coupling key YES 25%
9 2100 Shaft YES 25%
10 6700.2 Key YES 25%
11 3011 Radial ball bearing YES 50%
12 4590.2 Gasket YES 50%
13 3260.2 Bearing cover
14 6570.3 Screw
15 3711 Bearing labyrinth ring YES 50%
16 6569 Plug
17 4590.3 Gasket YES 50%
18 6570.4 Screw
19 6570.5 Screw
20 6580.1 Nut
21 3134.1 Support foot
22 6570.6 Screw
23 6570.7 Screw
24 4135 Drip pan
25 6580.2 Nut
26 6572.2 Stud
27 4212 Seal cover
28 4420 Seal pipe
29 4590.7 Gasket YES 50%
30 4590.8 ** Gasket YES 50%
31 2400 ** Sleeve YES 25%
32 4200 Mechanical seal YES YES 50%
33 6550 Cooling device
34 4610.1 O-ring YES 50%
35 4610.2 O-ring YES 50%
36 - Stuffing box cover (cooling cap)
36A 4113 Stuffing box cooling chamber cover
36B 4590.5 Gasket YES 50%
36C 4610.3 O-ring YES 50%
37 4590.6 Gasket YES 50%
38 1521 * Casing cover wear ring YES 25%
39 2200 Impeller YES 25%
40 6543 Lockwasher for impeller nut YES 25%
41 1500 Casing wear ring YES 25%
42 6570.8 Screw
43 3134.2 Support foot
44 1100 Casing
45 6569.2 Drain plug
46 2912 Impeller nut YES 25%
47 2215** Inducer
NB: Reference 32 - for details of various arrangements, refer to section 6.10, Sealing arrangements.
* These items are integral with the stuffing box cover on the following pump sizes: 125CPG225, 150CPG250, 50CPG315, 65CPG315,
100CPG315, 125CPG315, 150CPG315, 100CPG315, 125CPG400, 150CPG400.
** Optional features.