Flowserve U-MAG INNOMAG - Manual (Page 33)

U-MAG ENGLISH 26999990 10-14
Page 33 of 40
Figure 6-30
6.15 Gasoline Engine
Innomag products are only compatible with
certain gasoline engine designs. Contact your local
Flowserve Sales office, Distributor, or Representative
for further details.
6.15.1 Gasoline Engine Disassembly
a) Follow the steps for NEMA drive end disassembly
in section 6.12.1 to remove the wet end and outer
magnet assembly [0230].
b) Remove (4) screws from the adapter [1340].
c) Remove the adapter [1340] from the engine
mounting plate.
d) Loosen and remove the (4) small socket head cap
screws on the mounting plate.
e) Remove the mounting plate from the engine.
6.15.2 Gasoline Engine Assembly
a) Center the mounting plate on the engine and align
the holes.
b) Insert and tighten the (4) socket head cap screws
connecting the mounting plate to the engine.
c) Follow the steps for the NEMA drive end assembly
in section 6.13.1 to complete assembly.
Figure 6-31