Flowserve WDX - Manual (Page 34)

WDX USER INSTRUCTIONS ENGLISH 71576322 06-05
Page 34 of 46
®
6.8.3 Dismantling radial bearing
6.8.3.1 Antifriction bearings (WDXR and WDXC)
Grease lubricated
Oil lubricated
Remove the four cap screws of the bearing cover
[6577-03].
Remove the bearing cover [3263].
Straighten tab on bearing lock washer [6541-03] and
unscrew bearing lock nut [3712-03].
Remove the coupling spacer piece [2460-03].
Remove the eight cap screws of the bearing housing
[6577-04].
The whole line bearing assembly can then be
removed.
6.8.3.2 Line bearings (WDXE)
Free the bearing by removing screw [6570-02].
Remove the bearing bushing [3300] by means of a
disassembling screw M10.
Remove the snap ring [6544-03] and slide off the
shaft sleeve [3400-01].
6.8.3.3 Line bearings (WDXS)
Unscrew the bearing cap screws [6577-04].
Remove the bushing cover [3260].
Remove the snap ring [6544-01] and slide off the
shaft sleeve [3400-01].