First Co FRR - Manual (Page 7)

CARE AND MAINTENANCE
For continuing high performance, and to minimize possible equipment failure, it is essential that periodic maintenance be
performed on this equipment. For a current copy of the detailed Maintenance Program, log on to www.firstco.com and look
under “Product Information”.
To achieve maximum performance and service life of each piece of equipment a formal schedule of regular maintenance should
be established and maintained by a certified contractor.
The following is provided as a recommended maintenance schedule.
Monthly Check List
Inspect the unit air filters. Clean or replace as required.
Inspect the drain pan to be sure it is clean to permit the flow of condensate through the drain lines.
Inspect the supply and return air grilles for dust and fiber accumulation.
Yearly Check List
Clean the blower motor and oil if required.
Inspect the air handler unit casing for corrosion and loose fasteners.
Inspect the blower wheel and housing for cleanliness and/or looseness. Clean if necessary. Adjust and tighten if necessary.
Inspect all coil connections for leaks. Inspect the coil fins for excessive dirt or damage. Clean or repair if required.
Inspect electrical connections for tightness and controls for proper operating each heating and cooling season.
If strainers are installed in the valve packages, clean per manufactures directions.
Maintenance Updates
A current copy of the Maintenance Program log can be found at www.firstco.com under “Product Information”.
9