FiberPlex RMC-3101 - Manual (Page 11)

PSM‐2010/3010 Front Face
Figure 12 PSM‐2010 Front Face
Power Status LED – Indicates DC output for the power supply. A green LED indicates power good. An
audible alarm will sound if one supply in a redundant system has failed.
Fuse Access Panel – Allows access to the 5 x 20mm fuse. The AC power path is interrupted when in the
open position.
AC Mains Power Inlet – Conforming to IEC 320, standard power cords are attached here.
PSM‐2010/3010 Rear Face
Figure 13 PSM‐2010 Rear Face
Power Supply Grounding Plug – Pomona‐type plug provides a functional ground and aids retention of
the module within the chassis.
Power Connector Plug – DC output to the chassis bus; this also provides retention of the power supply
in the installed position.
1
2
3
4
5