EXCALIBUR 491 SoundMaster Classic USB Turntable - Manual (Page 6)

BEFORE USE
• Choose a location that avoids placing the unit in direct sunlight or near any heat source.
• Avoid locations subject to vibrations, excessive dust, cold or moisture.
• Do not open the cabinet as this may result in electrical shock. If a foreign object is
inserted accidentally contact your dealer.
• When removing the power plug from the wall outlet, always pull directly on the plug
and not the cord.
• Do not attempt to clean the unit with chemical solvents as this might damage the finish-
ing. Use a clean, dry cloth.
• In order to completely turn off the unit, unplug the power cord from the wall outlet.
• Keep this manual in a safe place for future reference.
LOCATION OF PARTS
1. POWER SWITCH
2. TONE ARM
3. SPEED CONTROL SWITCH
4. SECURITY HOOK
5. TONE ARM REST
6. TURNTABLE
7. TRANSPORTATION SCREW
(Large Silver Screw)
8. PLAY BUTTON
9. RETURN BUTTON
10. STOP BUTTON
11. USB JACK
12. LINE OUT
TURNTABLE SET UP
1. Connect the AC power cord to an electrical outlet. The standard voltage is 120V-50Hz.
2. The silver transportation screw is required to protect the phonograph chassis during
transportation. If the speed of your phonograph seems slow or you hear a rubbing sound,
adjust the screw with a coin to correct the balance of the turntable.
6