EXCALIBUR 187 SoundMaster Clock Radio - Manual

Congratulations on your purchase of the SOUNDMASTER™ AM/FM
AM/FM Clock Radio by Excalibur Electronics, Inc. You and your friends will
enjoy hours of great music with this innovative product. Compatible with
all iPod® models and other MP3 audio devices, this system provides high
quality sound and includes a digital clock, calendar, alarm, iPod charger, radio
and a remote control.
Features:
• Wake up to your favorite tunes on your iPod!
• SOUNDMASTER AM/FM Clock Radio lets you play your iPod videos on
your TV
(using the included cables).
• High quality sound and adjustable volume lets you play your
music as loud as you want.
• Alarm clock allows you to wake up to music from your iPod, radio or
the buzzer.
• Includes a remote control.
• Includes 5 universal iPod dock adapters ensure your iPod will fit perfectly
into the dock.
POWER ON/OFF: Press to turn ON or OFF or to reset the alarm when it sounds.
PLAY/PAUSE: Press to play or pause your iPod.
PREVIOUS TRACK: In iPod mode, press to skip to the previous track when the iPod
is playing. Press and hold to scan backwards while listening to a song. In radio
mode, press to tune the radio. Press and hold to scan radio stations.
NEXT TRACK: In iPod mode, press to skip to the next track when the iPod is playing.
Press and hold to scan forward while listening to a song. In radio
mode, press to tune the radio. Press and hold to scan radio stations.
VOLUME +: Press to increase volume.
VOLUME -: Press to decrease volume.
AM/FM: Press to select AM or FM stations in radio mode.
RADIO: Press to select RADIO mode.
SNOOZE: Press to SNOOZE the alarm or to dim the display.
Functions of the Remote Buttons Functions of the Buttons and Knobs Back of the SOUNDMASTER Clock Radio
SOUNDMASTER AM/FM Clock Radio Display
FCC Compliance
SOUNDMASTER CLOCK RADIO
OPERATION MANUAL
EXCALIBUR ELECTRONICS, INC., warrants to the original consumer that its products are free
from any electrical or mechanical defects for a period of 90 DAYS from the date of purchase. If
any such defect is discovered within the warranty period, EXCALIBUR ELECTRONICS, INC., will
repair or replace the unit free of charge upon receipt of the unit, shipped postage prepaid and
insured to the factory address below. The warranty covers normal consumer use and does not
cover damage that occurs in shipment or failure that results from alterations, accident, misuse,
abuse, neglect, wear and tear, inadequate maintenance, commercial use, or unreasonable use
of the unit. Removal of the top panel voids all warranties. This warranty does not cover cost of
repairs made or attempted outside of the factory. Any applicable implied warranties, including
warranties of merchantability and fitness, are hereby limited to 90 DAYS from the date of
purchase. Consequential or incidental damages resulting from a breach of any applicable
express or implied warranties are hereby excluded. Some states do not allow limitations on the
duration of implied warranties and do not allow exclusion of incidental or consequential
damages, so the above limitations and exclusions in these instances may not apply. The only
authorized service center in the United States is:
Excalibur Electronics, Inc.
13755 SW 119th Ave.
Miami, FL 33186 U.S.A.
Ship the unit carefully packed, preferably in the original carton, and send it prepaid, and
adequately insured. Include a letter detailing the complaint, along with your daytime
telephone number, inside the shipping carton. If your warranty has expired and you want an
estimated fee for service, write to the above address, specifying the model and the problem.
PLEASE DO NOT SEND YOUR UNIT WITHOUT RECEIVING AN ESTIMATE FOR SERVICING.
WE CANNOT STORE YOUR UNIT!
Limited 90-Day Warranty
• The SOUNDMASTER AM/FM Clock Radio uses two AA batteries for backup
(included) and the remote uses one CR2032 3-volt lithium battery (included).
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
(nickel-cadmium) batteries.
• Do not mix old and new batteries.
• Do not use rechargeable batteries.
• Remove exhausted batteries from the unit to avoid battery leakage.
• Do not short-circuit battery terminals.
• Remove batteries and store them in a cool, dry place when not in use.
• To avoid explosion or leakage, do not dispose of batteries in a fire or attempt
to recharge alkaline or other non-rechargeable batteries.
Excalibur Electronics reserves the right to make technical changes without notice in the
interest of progress.
Battery Information
AM/FM CLOCK RADIO
WITH DOCKING PORT FOR iPod ®
SOUNDMASTER is a trademark of Excalibur Electronics, Inc.
iPod is a trademark of Apple, Inc., registered in the U.S. and other countries.
Actual product may differ slightly from photograph.
Excalibur Electronics, Inc.
13755 SW 119th Avenue • Miami, FL 33186
Tel: 305.477.8080 • Fax: 305.477.9516 • www.ExcaliburElectronics.com
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable l interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Model 187
Installing Batteries Into The Clock Radio
You power your SOUNDMASTER AM/FM Clock Radio by using an AC adapter
(included). To use the AC adapter, connect the AC adapter to the DC jack located
on the back of the unit. Plug the AC adapter into an electrical outlet. Your
SOUNDMASTER AM/FM Clock Radio requires two AA batteries (included) for the
clock backup power. To install batteries, carefully turn it over so that the
SOUNDMASTER AM/FM Clock Radio is upside down on a soft surface. You'll find
the battery compartment on the unit's base. Press the side tab and lift to release
the lid of the battery compartment. Install two AA batteries, making sure to
match the polarity (+ and -) with the diagram inside the battery compartment.
Replace the lid by pressing on the side tabs and returning it to its original position.
Release the side tabs once the lid is secure. When installing batteries, be sure to
not mix old and new batteries or mix alkaline, standard (carbon-zinc) or
rechargeable batteries.
Installing Batteries Into The Remote
Your remote control requires one CR2032 3-volt lithium battery (included). To
replace the battery, press the tab on the base of the remote to the left to release
the battery compartment. Pull it out like you would open a drawer. Insert the CR-
2032 3-volt battery, making sure to match the polarity (+ and -) with the diagram
inside the battery compartment. Push it back, until it locks securely.
Installing Batteries
Setting Up the SOUNDMASTER AM/FM AM/FM Clock Radio Your SOUNDMASTER
AM/FM Clock Radio is preset to Eastern Standard Time. To change this setting, do the
following steps.
Depending on whether Daylight Savings Time (DST) is in effect, set the DST Switch
located at the bottom of the unit to +1 or -1 to activate this feature. Activating the
+1 switch will set the time forward by one hour. To change the time zone, press and
hold the Time Zone Button for approximately two seconds until the Time Zone
Indicator at the top right corner of the display shows the current time zone. Turn the
Setting Knob to select the time zone. ALS: Alaska HAI: Hawaii ATL: Atlantic EAS:
Eastern CEN: Central MTN: Mountain PAC: Pacific. Press the TIME ZONE Button again
to exit this mode. You should hear two beeps indicating the TIME ZONE has been set.
Setting the Time and Date To set the time, press and hold the CLOCK button for
two seconds until the display flashes. Turn the SETTING knob (located on the right
side of the unit) until the correct time is shown on the display. Press the CLOCK
button again to confirm the time. You should hear one beep indicating that the
CLOCK time is set. The year at the top right corner of the display will flash. Turn the
SETTING knob to change it or press the CLOCK button again to confirm the year. You
should hear one beep indicating that the year is set. The date at the top right corner
will flash. Turn the SETTING knob to change it or press the CLOCK button again to
confirm the date. You should hear two beeps indicating that the date is set.
Setting the Alarm To set the alarm, press and hold the ALARM SET button for two
seconds until the display flashes. Turn the SETTING knob until the desired alarm
time is shown on the display. A PM icon will be shown on the right of the time
display. There is no AM icon. When the alarm volume flashes at the right top
corner of the display turn the SETTING knob to set the ALARM volume. When
finished, press ALARM SET button again. You should hear two beeps indicating
that the ALARM is set.
Using Your SOUNDMASTER Clock Radio Press the WAKE TO button to select your iPod, the radio or the buzzer. A correspond-
ing icon will show on the top of the display. Press the ALARM SET button to confirm
your settings. You will hear two beeps indicating the alarm is set.
Alarm Functions The SOUNDMASTER AM/FM Clock Radio features a “SURE
ALARM” function. If power failure occurs or the AC cord is accidentally
disconnected, your alarm will not be affected (if you have the backup batteries
installed). However, if back-up power is used in the event of a power failure, the
SOUNDMASTER AM/FM Clock Radio will default to the buzzer setting.
This unit also features a “GENTLE WAKING” function. This means that when the
alarm sounds, it will gradually increase in volume. NOTE: To wake up to your iPod,
your iPod must be properly docked and powered off or the alarm will not work.
First, set the alarm time as described in the “Setting the Alarm” section of this
manual. You can change the sound you want to wake to by pressing the WAKE TO
button. Press the ALARM ON/OFF button to turn on the alarm.
When the alarm is sounding, press the POWER OFF/ALARM/RESET button on the
SOUNDMASTER AM/FM Clock Radio or the POWER ON/OFF button on the remote
control to turn the alarm off. The alarm will go off again the next day at the same
time. To stop the alarm from going off the next day, press the ALARM ON/OFF
button to turn the alarm function off. The ALARM icon and the WAKE icon will
disappear from the display.
If the ALARM is not turned off after it sounds, it will continue to sound for
approximately one hour before automatically turning off. This cycle will repeat
every 24 hours unless the settings are altered. If you are waking up to your iPod,
check to make sure it has an hour’s worth of music loaded. If not, set your iPod to
REPEAT mode. If you choose to set the alarm to iPod mode and there is no iPod
installed, your SOUNDMASTER AM/FM Clock Radio will default to the buzzer.
Sleep Mode To enter SLEEP mode, press the SLEEP button on the SOUNDMASTER
Clock Radio. The unit will turn off after the selected time. SLEEP mode also features
a “GENTLE SLEEP” function, which will gradually decrease the volume if you are
listening to your iPod or the radio. You can adjust the sleep time from 120, 90, 60,
30 or 15 minutes by pressing the SLEEP button. Pressing the SLEEP button during
the SLEEP mode will reset the SLEEP time to 15 minutes. Once the display changes
back to the current time, press the SLEEP button to view the amount of SLEEP time
remaining. Pressing it again will change the SLEEP time to 15 minutes. The
SOUNDMASTER AM/FM Clock Radio has an independent VOLUME setting for
SLEEP mode so you can adjust the SLEEP volume without affecting the alarm
volume. While in SLEEP mode, turn the VOLUME knob on the SOUNDMASTER
AM/FM Clock Radio or the VOL+ or VOL- on the remote control to adjust the SLEEP
volume. The SLEEP volume will remain at that level until you change the settings.
If you want to stop listening to your iPod or radio during SLEEP mode, press the
ALARM RESET/POWER OFF button on the SOUNDMASTER AM/FM Clock Radio or
the POWER ON/OFF button on the remote control.
Installing your iPod
Your SOUNDMASTER AM/FM Clock Radio comes with five removable dock
adapters to ensure your iPod fits properly in the docking station. To insert a dock
adapter, first select the correct size for your iPod. Due to the release of newer iPod
models, new dock adapters are subject to availability. Gently insert the iPod dock
adapter into the docking station. Carefully insert your iPod into the dock. To
remove your iPod from the SOUNDMASTER Clock Radio, carefully remove your
iPod, then remove the dock adapter by pulling gently upwards.
Listening to your iPod After you've installed your iPod, press the PLAY button on
the remote control or on the iPod. To PAUSE, press the same button. The VOLUME
knob is located on the left side of the unit. To increase the VOLUME, turn the
VOLUME knob counter-clockwise. To decrease the VOLUME, turn the VOLUME
knob clockwise. To change tracks, press the |<< or >>| button on the remote
control or the iPod. To turn it OFF, press the ALARM RESET/POWER OFF button on
the SOUNDMASTER AM/FM Clock Radio or the POWER ON/OFF button on the
remote. Your iPod will continue to charge while docked in the SOUNDMASTER
Clock Radio.
Charging your iPod Your iPod will charge when it is docked in the SOUNDMASTER
Clock Radio. PLEASE NOTE: iPod Shuffle and other non-docking iPod models will
not charge.
Listening to a Non-Docking iPod or Other Portable Audio Devices If you are
using an iPod without a docking port, MP3 player or other portable audio device,
you can still play it through the SOUNDMASTER AM/FM Clock Radio via the LINE-
IN jack. Before using the LINE-IN jack, make sure an iPod is not docked in the
SOUNDMASTER Clock Radio. Plug one end of the audio patch cord (included) into
the headphone or LINE-OUT jack on your device and the other end of the patch
cord into the SOUNDMASTER AM/FM Clock Radio LINE-IN jack, located on the
back of the unit. Press the iPod button on the SOUNDMASTER AM/FM Clock Radio
(or PLAY/PAUSE button on the remote). The AUX icon will appear, indicating AUX
playing mode. Turn on and play your device. Use the VOLUME knob on the left side
of the unit to adjust the volume. To turn OFF the unit, press the ALARM
RESET/POWER OFF button (or the POWER ON/OFF button on the remote). Be sure
to turn off your device as well.
Listening to the Radio To listen to the radio, first fully extend the AM antenna
wire to improve reception. NOTE: Do not strip, alter or attach to other antennas.
The AM antenna loop should be placed up to 12 inches away from the unit for
best reception. You can also rotate the AM antenna loop to improve reception. To
listen to the radio, first press the RADIO button on the SOUNDMASTER AM/FM
Clock Radio or on the remote control. The radio frequency will appear on the top
right corner of the display. Press the AM/FM button on the SOUNDMASTER AM/FM
Clock Radio or on the remote control to select AM or FM radio stations. Turn the
SETTINGS knob on the SOUNDMASTER AM/FM Clock Radio or the >> or << button
on the remote control to find your desired station. Turn the VOLUME knob on the
SOUNDMASTER AM/FM Clock Radio or the VOL+ or VOL- buttons on the remote
control to adjust the VOLUME. To turn the radio OFF, press the ALARM
RESET/POWER OFF button on the SOUNDMASTER AM/FM Clock Radio or the
POWER ON/OFF button on the remote control.
Connecting your SOUNDMASTER AM/FM Clock Radio to External Equipment
You can connect the SOUNDMASTER AM/FM Clock Radio to another line level
device, such as an amplifier or recording device through the LINE-OUT jack located
at the back of the unit. The VOLUME setting on the SOUNDMASTER AM/FM Clock
Radio does not affect the line level. Adjust the VOLUME through the device you
connect to. You can connect your SOUNDMASTER AM/FM Clock Radio to your
television by using the OUTPUT terminals on the back of the unit. Before connecting,
be sure to set your iPod video to television. The OUTPUT terminals output the video
and audio signals shown on the television.
If your television has an S-VIDEO INPUT terminal, connect your SOUNDMASTER
AM/FM Clock Radio to it. If not, connect it to the video terminal, as shown below.
iPod not included.
Volume Knob
Dock
Snooze/Dimmer
iPod Radio AM/FM Sleep Clock
Alarm On/Off Alarm Set Wake-To Alarm Reset/Power Off
Time Zone
Setting Knob
Clock Display
Line-Out
Battery Low
Indicator Time/Alarm
Display PM Indicator Alarm Armed Radio Frequency/
Time Zone Indicator
AM/FM
Indicator
Daylight
Savings Time
Sleep Indicator Wake To Indicator:
iPod, Radio, Buzzer iPod Indicator
Power On/Off
Previous Track
Volume -
Radio
Snooze/Dimmer
Play/Pause
Next Track
Volume +
AM/FM
Line-In S-Video Video Audio Left
Audio Right
AM Loop Antenna Socket
AC Adapter
(DC In)
NOTE: DO NOT EXPOSE YOUR SOUNDMASTER
AM/FM AM/FM Clock Radio TO RAIN OR MOISTURE.
WARNING:
To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
CAUTION:
Use of any controls, adjustments or procedures other than those specified within this
manual, may result in hazardous radiation exposure.
Caution and rating label is located on the product.
CAUTION - TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
CAUTION - DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.
REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.
CAUTION - TO REDUCE THE RISK OF FIRE, DO NOT PLACE ANY HEATING OR
COOKING APPARATUS BENEATH THIS UNIT.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (sevicing) instructions in the literature
accompanying the appliance.
The house with an arrowhead symbol is intended to alert the user
to use the transformer in normal indoor temperatures, not
extreme temperatures.
IMPORTANT SAFETY INSTRUCTIONS
Read and keep these instructions for reference.
Heed all warnings and follow all instructions.
Do not use this product near water.
Clean using only a slightly damp cloth. Do not use cleaners with harsh chemical
agents or detergents.
Do not block any of the ventilation openings.
Install and use in accordance with the manufacturers instructions.
Do not place product near any heat sources such as radiators, heat registers, stoves or
other apparatus (including amplifiers) that produce heat.
This product may be equipped with a polarized alternating-current line plug (a plug
having one blade wider than the other). This plug will fit into the power outlet only
one way. This is a safety feature; if you are unable to insert the plug fully into the outlet,
try reversing the plug. If the plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
Protect the power cord from being damaged or pinched.
Only use attachments/accessories specified by the manufacturer.
Unplug product during lighting storms or when you are not going to use it for a long
period of time.
Refer all servicing to qualified service personnel. Service is required when the product
has been damaged in any way. This includes, but isn't limited to, a damaged power
supply cord or plug, liquid spilt or an object dropped onto the product, exposure to
rain or moisture, dropping the product or the product not operating normally.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.