Technical data – ESI aktiv 05 Rev.B User Manual

Page 7

ESI

aktiv 05

Orientation

It’s very important to place the aktiv 05 vertically. Never place them horizontally.

Comments

Please also make sure to not place any obstacles that may block the flow of air or that could
generate sound reflections (especially highly reflective material including glass or metal) in front of
the monitor. Also, don’t put plants in pots on top or too close to your monitors. Keep a certain
distance to the wall behind the speaker, as it could block air flow.

4. Technical Data

Please note that technical specifications are subject to change without any prior notice. The specs
given in this manual are up-to-date at the time of the creation of this document.

Specifications

Model: aktiv

Type:

2-way powered speaker

System Type:

Active Studio Monitor Speaker

Dimensions:

250mm (H) x 176mm (W) x 200mm (D)

Weight: 4.5kg
HF Driver:

1" silk dome tweeter

LF Driver:

5" kevlar curved cone (magnetic shielding type)

Output Power:

60W (HF 30W, LF 30W), 85W AC consumption power

Working Voltage:

AC100-240V 50/60Hz, with 115V / 230V AC selection switch

Frequency Response:

50 Hz – 20kHz

Input Impedance:

23.3 kOhm balanced, 13.3 kOhm unbalanced

Crossover Point:

2.5kHz

SPL: 88dB+/-

3dB

Rated Noise Power:

30 Watt (THD=1%, 4ohm@1kHz)

Input Sensitivity:

75mV@1Watt, 415mV@30Watt

Input Connectors:

XLR / TS1/4" combo connector, balanced / unbalanced input

Volume Control:

min - center - max

Indicator:

power LED on front panel, blue