Freestanding, Assemble a single sided solution – Elfa Freestanding User Manual

Page 2

www.elfa.com

Sida 2 av 5

Freestanding

Assemble a single sided solution

If assembling on tile or wood, you must

protect the floor.

NOTE

Insert upright into foot

–

The holes on the side of the upright indicate the

bottom of the upright. There is no front or back

to the uprights.

–

Line up the upright with the slot in the foot.

(Fig. A) To secure, you can tap the upright and

foot together on the ground or use the mallet.

Make sure the upright is all the way into the

slot on the foot. (Fig. B)

–

Repeat with a second upright and foot.

Assemble a single sided solution

Install crossbraces

–

— Place the assembled uprights/feet on the floor as

shown. (Figure C)

–

— Insert crossbraces diagonally into holes at bottom of

the uprights. (Figure C)

–

— Gently hold the crossbraces at the center with one

hand. Using your other hand, lift one foot so that it faces

up, then lift the other foot. (Figure D)

Elfa Lumi AB

Elfagatan 5, 593 87 Västervik
Tel: +46 392-389 10 Fax: +46 392-361 25. E-mail: [email protected]