Elfa Top Track and hang standards - Manual

www.elfa.com
Sida 1 av 13
TIP for getting started
Be careful not to drill into any electrical wires,
ductwork, plumbing or other damagable
components. If you have any questions on
the locations of these wires or lines, please
contact a professional electrician or plumber
before drilling.
Tools needed: pencil, scissors, level, power
drill, drill bits, #2 Phillips head bit for power
drill, #2 Phillips head screwdriver, hammer,
tape measure, ladder or step stool.
Elfa Lumi AB
Elfagatan 5, 593 87 Västervik
Tel: +46 392-389 10 Fax: +46 392-361 25. E-mail: [email protected]
Top Track, Hardware and Hang Standards
Tip for getting started